Gradient Scale

Installation, AustriArchitecture II, Zumtobel, Vienna, Austria

This project reached Finalist Status at the FEIDAD (Far Eastern International Digital Architecture Design) Award. See here for the entry website: SPAN-FEIDAD

The object “Gradient Scale” was conceived and built for the exhibition “AustriArchitecture”, a group exhibition
of 6 young Austrian architecture praxises and one client. The exhibitions aim was to present the first steps
into independent architecture production, the concepts, ideas and methods of the younger generation
of Austrian architects.
The show was curated by Lilli Hollein and was on show at the Galerie AEDES East, Berlin, and the
 Zumtobelstaff
Lightforum in Vienna.

Synopsis
The main aim of the gradient scale project was to experiment and to scrutinize the concept of scale in
 architecture. In general the concept of scale is considered to be a very rigid idea, following rules that seem to be 
unbendable. To understand plans or models, architects and contractors are bounded to a formula, or 
etiquette of communication, the scale. The gradient scale project background is a thesis, which formulates
 the idea of non-sequential scalar growth. The entire project is an experimental digital scape, produced as
 a presentation platform for the projects of SPAN (Matias del Campo & Sandra Manninger) at the 
AustriArchitecture exhibition in the Zumtobel Lightforum in Vienna, Austria.


To achieve the conceptual idea of a continuously growing scalar model an MEL algorithm was developed
 which repeated a series of 5 curves along the predefined length of the exhibition object.
These curves were connected in Maya, creating a Birail 3plus surface. By creating several iterations of 
forces influencing the surface, different degrees of articulations of the final element were created which
 leaded to the resulting object.
The entire object can be seen as an experimental playground for scaleless architecture.
The consequence being a deformation field for projects. Take for example the idea of placing a long project 
on the gradient scale.

The result is a deformed object getting smaller, the bigger the scale is, depending on 
where you place the object the deformation varies.

The resulting undulating surface can be read as a repetition of a 1:1 Detail, created by the first iteration of
 5 curves. The more the frequency of the curves grows, and simultaneously the amplitude of the curves get flatter, the bigger the scale gets, resulting in a pattern which can be read as a texture in an urban scale.
 Analyzing the qualities of this continuous surface results in an impetus for the development of spacial ideas,
no matter which scale, from Urbanistic Challenges to Surface Details.


Production




The main theoretical background, and the digital fabrication means applied in this project are interlocked with
 each other. Certain Issues connected to digital production methods were explored using a 3axis-milling
 machine. The Software Surfcam, which is used to calculate the NC files for the milling machine gives the 
architect a powerful tool to examine different surface patterns which emerge from the isoparms created in
the MAYA model. By consciously manipulating the isoparms direction the final, milled result can be severely 
formed, as well as by choosing different mill bits and variating the stepsizes of the milling path.

There is a wide range of possible applications in architecture for pattering. The jagging and rippling of the
 surface can be used to create reinforcement ribs in the panel’s structure, the objects surface can get a
 defined direction.

Jagging can be used as a basis for geometrically consistent apertures. The rippling can 
help to reduce the noice in interiors, or can be used to control the acoustical properties of a concert hall.
There are many more of possible applications.

Another issue explored in the production of the gradient scale is the problem of panelization. The Object
 is 5.4m long and 1.2m wide. It had to be produced in 3 Segments. Like in a real construction situation, 
it had to be considered how the piece is divided into sections, which are put together on site.
The MAYA model, and its isoparms, provide a possible approach to the problems solution. Instead of
 cutting the piece in straight rectangular pieces, the cuts follow the models isoparms, creating puzzlelike
 joints. As the joints follow the MAYA models geometry, their formal appearance matches the entire 
projects language.



The object “Gradient Scale” was conceived and built for the exhibition “AustriArchitecture”, a group exhibition
of 6 young Austrian architecture praxises and one client. The exhibitions aim was to present the first steps
into independent architecture production, the concepts, ideas and methods of the younger generation
of Austrian architects. The show was curated by Lilli Hollein and was on show at the Galerie AEDES East, Berlin, and the
Zumtobelstaff Lightforum in Vienna.

collaborators: thomas aigelsreiter, fritz biedermann, manfred hermann, philipp müller, rob henderson